GERMAN APPROACH AND EXPERIENCE FEEDBACK OF TRANSPORT ABILITY OF SNF PACKAGES AFTER INTERIM STORAGE

Year
2013
Author(s)
Frank Wille - Federal Institute for Materials Research and Testing (BAM)
Bernahd Droste - Federal Institute for Materials Research and Testing (BAM)
Holger Volzke - Federal Institute for Materials Research and Testing (BAM)
File Attachment
122.pdf102.18 KB
Abstract
In Germany the concept of dry interim storage of spent fuel in dual purpose metal casks is implemented, currently for periods of up to 40 years. The casks being used have an approved package design in accordance with the international transport regulations. The license for dry storage is granted on the German Atomic Energy Act with respect to the recently revised “Guidelines for dry interim storage of irradiated fuel assemblies and heat-generating radioactive waste in casks” by the German Waste management Commission (ESK). For transport on public routes between or after long term interim storage periods, it has to be ensured that the transport and storage casks fulfil the specifications of the transport approval or other sufficient properties which satisfy the proofs for the compliance of the safety objectives at that time. In recent years the validation period of transport approval certificates for manufactured, loaded and stored packages were discussed among authorities and applicants. A case dependant system of 3, 5 and 10 years was established. There are consequences for the safety cases in the Package Design Safety Report including evaluation of long term behavior of components and specific operating procedures of the package. Present research and knowledge concerning the long term behavior of transport and storage cask components have to be consulted as well as experiences from interim cask storage operations. Challenges in the safety assessment are e.g. the behavior of aged metal and elastomeric gaskets under IAEA test conditions to ensure that the results of drop tests can be transferred to the compliance of the safety objectives at the time of transport after the interim storage period. Assessment methods for the material compatibility, the behavior of fuel assemblies and the aging behavior of shielding parts are issues as well. This paper describes the state-of-the-art technology in Germany, explains recent experience on transport preparation after interim storage and points out arising prospective challenges.