Resources
Items marked as restricted are available to members only. Join INMM today to access over 60 years of insight from experts in the nuclear materials management industry.
Type:Annual Meeting Proceedings
Abstract:Physical protection of special nuclear material in the Department of Energy (DOE) is required and provided to achieve two major objectives…
Type:Annual Meeting Proceedings
Abstract:In the definition of IAEA safeguards objectives, terms such as significant quantities, timely detection and risk of detection are used;…
Type:Annual Meeting Proceedings
Abstract:At the Center, of VALDUC, we have to measure plutonium in the form of wastes(chips, powder, filings) contained in plastic bags and…
Type:Annual Meeting Proceedings
Abstract:A strategy for investigating an excessive inventory difference (ID) is described. Possible sources of error are discussed in terms of…
Type:Annual Meeting Proceedings
Abstract:Two vulnerability analysis techniques, Diversion Path Analysis (DPA) and Matrix Analysis of the Insider Threat (MAIT), were applied by EG…
Type:Annual Meeting Proceedings
Abstract:The Three-Miie Island incident has directed regulatory attention to the issue of emergency response. With the thought in mind that there…
Type:Annual Meeting Proceedings
Abstract:The Institute of Nuclear Materials Management recognizes the need to be in a position to provide assistance to the Nuclear Industry, both…
Type:Annual Meeting Proceedings
Abstract:IAEA updates the book inventory as of the date an inventory change occurs (evaluation concept) whereas Buratom - and any other national or…
Type:Annual Meeting Proceedings
Abstract:The Lawrence Livermore National Laboratory (LLNL) and the U.S. Nuclear Regulatory Commission (NRC) Office of Nuclear Regulatory Research (…
Type:Annual Meeting Proceedings
Abstract:The April 1978, NRC MC&A Task Force Report\"1 identified weaknesses in current material accounting (MA) systems. This report was…
Type:Annual Meeting Proceedings
Abstract:A system performance evaluation methodology has been developed to aid the Nuclear Regulatory Commission (NRC) in the implementation of new…
Type:Annual Meeting Proceedings
Abstract:This paper discusses the determination of some of the process inventory uncertainties in the Fast Flux Test Facility (FFTF) process line at…
Type:Annual Meeting Proceedings
Abstract:It is a pleasure to have the opportunity to appear before you again to share some of my thoughts on a subject of prime importance from my…
Type:Annual Meeting Proceedings
Abstract:SAI under contract to BNL/TSO has developed guidelines for preparing IAEA Design Information Questionnaires (DIQs). These guidelines may be…
Type:Annual Meeting Proceedings
Abstract:It is particularly important in this critical period in the application of nuclear energy for peaceful purposes for persons with technical…
Type:Annual Meeting Proceedings
Abstract:The impact of threat levels on the design of a facility protection system is examined in light of. the following factors: (1)…
IMPLEMENTATION OF THE FACILITY-INTEGRATED COMPUTER SYSTEM (FICS) FOR NUCLEAR MATERIAL ACCOUNTABILITY
Type:Annual Meeting Proceedings
Abstract:This paper describes a computer system that has been developed for nuclear material accountability and has been operating in an active…
Type:Annual Meeting Proceedings
Abstract:Materials accounting for special nuclear material in fuel cycle facilities is implemented more efficiently by applying decision analysis…
Type:Annual Meeting Proceedings
Abstract:In the recently concluded INFCE study a variety of possibilities to minimize the proliferation risk was discussed, and their applicability…
Type:Annual Meeting Proceedings
Abstract:The paper describes briefly the experience gained so far with International Safeguards in nuclear facilities of the Federal Republic of…