ISOTOPIC RATIOS AND EFFECTIVE POWER DETERMINED BY GAMMA-RAY SPECTROSCOPY VS MASS SPECTROSCOPY FOR MOLTEN SALT EXTRACTION RESIDUES

Year
1990
Author(s)
Victoria Longmire - Los Alamos National Laboratory
J.R Hurd - Los Alamos National Laboratory
Teresa L. Cremers - Los Alamos National Laboratory
S.M. Long - Los Alamos National Laboratory
W.A. Sedlacek - Los Alamos National Laboratory
A.M. Scarborough - Los Alamos National Laboratory
Abstract
Impure plutonium metal is routinely processed by molten salt extraction (MSE) to reduce the amount of americium in the metal product. Throughput at various facilities where similar processes are performed has made it essential to evaluate uncertainties and possible discrepancies in the analyses of these difficult MSE materials. In an effort to evaluate the plutonium isotopic ratios and americium concentrations obtained from gamma-ray spectral data analyzed by the computer code GRPAUT, measurements were made on ten MSE salts as received and after pulverization and blending. These results were then compared to the specific powers obtained from isotopic ratios determined by mass spectrometry on these same ten samples. Americium values ranged from a few thousand partsper- million of total plutonium to greater than 50,000 ppm. Our results indicate a small discrepancy between specific powers as determined by GRPAUT on \"as received\" vs pulverized and blended MSE salts. The specific powers obtained via GRPAUT on the pulverized salts agree somewhat better with specific powers obtained from the mass spectroscopy data. This work may indicate that a small discrepancy exists in the specific powers by using GRPAUT on heterogeneous,high americium samples.